1. Installation
===============
1.1 Install OPOS Common Control Objects CCOs (OposCCOs-1_9_000.exe)
    <You can download it at http://www.monroecs.com/oposccos_current.htm>
1.2 Run setup.exe



2. MSR Settings for OPOS
========================
1. Open the programming utility, Matrix Maker
2. Select the model you want to set
3. Click Keyboard -> MagStripe Card Reader Setting
4. For Track 1, set the Start Sentinel as % and the End Sentinel as ?
5. For Track 2, set the Start Sentinel as ; and the End Sentinel as ?
6. For Track 3, set the Start Sentinel as : and the End Sentinel as ?
(For PS2)
	7. Click Code for Header, enter 5F for the Hex Code, click Insert, then OK
	8. Click Code for Suffix, enter 5F for the Hex Code, click Insert, then OK
(For USB)
	7. Click Code for Header, enter 94 for the Hex Code, click Insert, then OK
	8. Click Code for Suffix, enter 94 for the Hex Code, click Insert, then OK
9. Click Update


Improvements (Will be implemented soon)
---------------------------------------
We will later modify the firmware such that you can gain the same effect by simply enabling the option "HY OPOS settings" in "Matstripe Card Reader Setting" dialogue window in Matrix Maker.



3. KB Settings for OPOS
=======================
1. Open the programming utility, Matrix Maker
2. Select the model you want to set
3. Left click any key on the keyboard image in the main window
4. Choose "OPOS Code"
5. Select one of HYPOSKey index.
6. Click OK
7. Click Keyboard -> Update Key Mappings



4. Heng Yu OPOS Demo Applications
=====================================
There are 2 demo programs for MSR and KB.
1. The default location for the MSR demo program is
   C:\Program Files\HengYuRetail\OPOS\Demo\HYOPOSMSRDemo.exe
2. The default location for the MSR demo program is
   C:\Program Files\HengYuRetail\OPOS\Demo\HYOPOSKBDemo.exe



Heng Yu Electronic Manufacturing Ltd.
http://www.hengyu-tech.com
